Life Style

How to Safely Wash an Electric Blanket

Electric blankets, throws, weighted blankets, and mattress pads offer extra warmth that’s welcome on a chilly evening or when recovering from an injury or illness. But what happens when they become soiled?

Nowadays, all the electric blankets and heated are designed for machine-washing and machine-drying. The key to successfully washing them is to have a watchful eye on the washing cycles so you can keep exposure to water and heat to a minimum.

Before you snuggle up with your electric blanket this winter, make sure it’s clean. Here’s how to do it.

How Often to Clean an Electric Blanket

A machine-washable electric blanket can be washed every couple of weeks or once a month during the cold season. Treat it gently, however, by alternating between air-drying and machine-drying as an extra measure to keep the interior connections of the blanket in good shape.

What You’ll Need

How to Safely Wash an Electric Blanket 1

Equipment / Tools

  • Washing machine
  • Dryer
  • Clothesline or drying rack

Materials

  • Laundry detergent

Instructions

Prep the Blanket

How to Safely Wash an Electric Blanket 2

Shake out the blanket to get rid of as much loose debris as possible. Before you put the electric blanket in the washing machine, remove all cords and controls.

Add the Blanket to the Washing Machine

How to Safely Wash an Electric Blanket 3

For high-efficiency washers, load the blanket in loosely. For standard washers with a central agitator, evenly spread the blanket around the drum. You may need to add a couple non-lint-producing towels or sheets to balance the load.

Select a Water Temperature and Detergent

How to Safely Wash an Electric Blanket 4

Wash the blanket in cool to warm water with your regular detergent. Don’t add chlorine bleach or fabric softener—they could deteriorate the interior components of the blanket.

Choose the Washer Cycle

How to Safely Wash an Electric Blanket 5

Use the short or gentle cycle setting. If you can set the final spin speed, reduce it to the lowest setting to prevent excess force on the blanket’s inner wiring.

Wash Quickly and Switch to the Rinse Cycle

How to Safely Wash an Electric Blanket 6

Let the machine agitate for two to three minutes, and then skip to the rinse cycle. Once the rinse cycle is done, remove the blanket immediately.

Dry Gently

How to Safely Wash an Electric Blanket 7

Use a cool or air-only setting on your dryer. It is best to only partially dry in the dryer for about 20 minutes, and then remove the blanket while it is still damp and allow to finish air-drying on a clothesline or drying rack. High heat may shrink the blanket and damage the wires’ insulation.

Be sure your dryer is large enough to allow the blanket to tumble freely. If it is not large enough, use a laundromat dryer set on cool or air-dry only.

Ironing

Because the iron’s heat can damage the wires’ insulation, electric blankets should not be ironed. If it is wrinkled, hang the blanket from a shower rod, hand smooth, and let gravity pull out the wrinkles.

Storing an Electric Blanket

During warm weather, electric blankets and heated mattress pads are usually stored away. Follow this checklist to ensure your blanket is stored properly and ready for that first cold snap.

Check for Loose Wires, Tears, or Scorching

How to Safely Wash an Electric Blanket 8

After unplugging the controls from the blanket and wall, check for any exposed wiring, scorched areas, rips, or tears. Determine if repairs can be made or if the blanket should be replaced.

Store the Clean, Dry Blanket

How to Safely Wash an Electric Blanket 9

Before storing, wash and dry the blanket carefully. Be sure it’s completely dry before storing. Check the controls and cords for any cracks or darkened areas. If you find these, the blanket should be replaced.

Roll but Don’t Fold

How to Safely Wash an Electric Blanket10

Once the blanket is clean and completely dry, roll the blanket or pad gently. Don’t create sharp, hard folds because they could damage the inner wires. Store in a dry, climate-controlled, and insect- and rodent-free space.

Store the Controls and Cords

How to Safely Wash an Electric Blanket 11

The controls and cords should be stored unplugged from the blanket or pad. Loosely coil the cords, being sure not to crimp or pinch them. Place the cords and bedding together in a soft cloth bag or plastic container to prevent dust from settling.

Repairs

If the blanket has stopped working, unplug it, and double-check that the connections are all tight. Any cracked or discolored components should be discarded and replaced. Small tears or rips can be repaired by hand with matching thread and a needle. However, if the rip exposes any wires or electrical components, the blanket should not be used again.

Source
thespruce.com
Back to top button