Life Style

10 Of The Most Worst Mistakes That Shorten The Life Of Your Vacuum Cleaner

Here are the most common mistakes that can shorten the life of your vacuum cleaner. Read on to find out useful ways to help your vacuum cleaner last longer and run more efficiently.

1. You don’t remove clogs

Do a quick visual check for clogs to the hose and wand after every time you use your vacuum cleaner. Unclogging your hoses not only improves suction power, but it can help the vacuum run more efficiently and last longer. If you can’t reach the jammed debris with your hand, use a mop handle or a gardening stake to push it through. An easy test: After detaching the hose and wand, try sliding a nickel through them. If it gets stuck, you know it’s clogged.

2. Not wrapping the cord up

It’s easy to get lazy and leave the cord out to get stepped on by family and pets. But by wrapping the cord back up after vacuuming, you can prevent damage to it while also avoiding potential hazards including electrocution for family pets or inquisitive crawlers who like to chew. If you don’t have time to wrap up the cord, at the very least, you should always unplug it.

3. You’re not detangling brushes

Most vacuum cleaners have rotating brushes at the intake port that kick dust and dirt loose from the carpet so they can get sucked up by the air stream. But when hair, pet fur, or loose strings gets trapped in the brushes, they can’t work as effectively. Using a small pair of scissors, gently cut through the debris to free up the brushes, then use a comb to smooth them out.

4. Not replacing the bag or emptying the canister

Whether your vacuum uses a bag, canister, or cup, an overfilled unit will run less efficiently and not last as long. While it’s easy to tell when a bagless unit is full, it can be harder to tell when a vacuum bag needs replacing. If you notice a drop in suction, it could be a sign it’s full from lightweight, fluffy material such as pet hair. For maximum performance and to make your vacuum last longer, replace the bag or emptying the canister or cup when it is half to two-thirds full.

5. You’re not changing out or cleaning the filters

Each vacuum is different, but your manual should indicate how often filters need to be replaced or cleaned. Many vacuum models come with an accordion-shaped paper filter and a sponge-like ring filter. For units with washable filters, be sure to follow the washing guidelines from the manual. Of course, the frequency will vary depending on how often you vacuum and how messy your floors are. If the filter looks dirty, it’s time to switch it out or clean it.

6. You’re not replacing the drive belt

This belt wraps around the beater brush allowing it to turn. If it’s not working correctly, the beater brush won’t loosen dirt and debris from the carpet fibres. By flipping the power-head over, you can glance at the belt, looking for tears or cracks. If the belt looks loose, that’s another sign it’s time for a new belt.

7. Storing attachments separately

Attachments usually come with a storage spot, either on the vacuum itself or in a separate box or bag, yet it’s easy to get lazy. Sometimes, we leave a dusting brush or an upholstery tool on the side table instead of walking it down to the hall closet. Not that big of a deal, right? Until it gets lost or stolen by your puppy for her new chew toy. By storing the attachments together with the vacuum cleaner in a safe spot, parts are less likely to be damaged or get lost.

8. Not pre-cleaning the areas

To stretch out the life of your vacuum cleaner, give the room a once-over. Move backpacks, socks, or clothing with drawstrings to prevent them from catching in the belt. While you can turn off the vacuum and pull them out, over time it could loosen the belt and shorten the life of your vacuum cleaner. Next, check for fallen food items like chips or cookies or small toys like LEGO. Scoop them before vacuuming the area.

9. Not stopping when there’s smoke

This might seem really obvious, but sometimes we get into turbo-mode—pushing the vacuum beyond its limits. Then even when we smell smoke, we optimistically assume we can fit in just one more room before problem-solving. But prevention is key. “When stress to the motor is present, the motor heats up and usually burns the belt, causing smoke,” suggests Do It Yourself. They advise cutting the burnt belt off with scissors, then replacing it before continuing to vacuum.

10. Using it too often

Think about what’s making your floors dirty in the first place, then try to circumvent it so you can use your vacuum cleaner less frequently. Try storing your shoes in a bin by the front door—here’s why you should take your shoes off the minute you enter the house. Other tricks: Instead of taking snacks to your TV-room, eat at your kitchen table so you don’t get crumbs everywhere and brush pets outdoors on a regular basis to decrease the amount of pet hair on your floors and furniture.

Source
Reader's Digest
Back to top button