Life Style

Simplpe Ways to Clean Carpets Without a Machine

Want to clean your carpet but hate those bulky machines? Follow these DIY cleaning tips and methods to learn how to clean carpet without a machine.

Alicia Chilton – Family Handyman

Vacuuming and carpet cleaning might top your list of most dreaded chores, but consider yourself lucky, 21st-century homeowner. Our forebears could hardly conceive of robotic vacuum cleaners and would have marveled at upright vacuums that glide effortlessly across the floor.

Today’s carpet cleaning machines are easily accessible and far less clunky, and professional carpet cleaning companies have the process down to a science. But there may be instances when you want to forego a machine altogether. Maybe you need to clean your carpet immediately, want to save some cash or would just like to give it a go to see if you can do it. Carpet cleaning requires patience and an attentive technique.

The basic rules to cleaning carpet without a machine are:

  • Use cleaner or soaps sparingly;
  • Rinse away any solution used during the cleaning process;
  • Ensure the carpet is adequately dried. Trapped moisture may lead to mold or mildew problems or a damaged subfloor.

Spot Cleaning Carpets Without a Machine

If you’re lucky, you might just need a little spot cleaning here and there. For small and recent carpet stains, Two Maids & A Mop Director of Franchise Operations Lauren Bowen recommends a simple DIY method. “Fill a spray bottle with 1/4 cup white vinegar, one tablespoon dish soap and water,” Bowen says. “Spray the stain generously and then blot it consistently with a clean towel until the stain is removed.”

unnamed

When using a carpet cleaning solution or soap, be sure to rinse lightly with clean water to remove any remaining suds, then follow up with thorough drying.

Keep these tips in mind:

  • Treating stains as they happen, or when you start to notice discoloration, is important. Cleaning and organizing expert Michelle Hansen, owner of Practical Perfection, recommends Folex Carpet Spot Remover for stain treatment.
  • Always test cleaning products and solutions, whether homemade or purchased, to make sure your carpet is colorfast. Do the test in a small, inconspicuous area and let it dry before you dive in, says Craig Gjelsten, vice president of operations for Rainbow International Restoration, a Neighborly company.
  • As you clean those spots, you might be tempted to add a little elbow grease. Don’t. Light blotting is better than heavy-duty rubbing. “Rubbing a stain could cause it to spread or soak deeper into the carpet fibers or fabric,” says Leanne Stapf, chief operating officer of The Cleaning Authority. “This makes lifting the stain more difficult. Instead, you should blot a stain with either a paper towel or washcloth. This will soak up any remaining liquid as opposed to scrubbing it deeper into the fabric.”

5df2f7d40dec1958c870aa30 cong dung baking soda 1

Diana Rodriguez-Zaba, president of ServiceMaster by Zaba, a certified carpet cleaning company, recommends using baking soda, carpet shampoo, water and towels. The method takes lots of towels, so you may want to ask a friend or family member if they have some old towels you can borrow.

  1. Start by sprinkling baking soda over the carpet and vacuum thoroughly to remove loose debris. (The baking soda also works to remove odors.)
  2. Add two drops of carpet shampoo and warm water to a clean spray bottle. Spray the mixture over the carpet, taking care not to saturate the fibers.
  3. Brush over the carpet with a carpet brush to remove any trapped dirt.
  4. Blot the area with dry towels to remove as much moisture as possible.
  5. Then fill a clean spray bottle with fresh water and spray the same area.
  6. Use another set of dry towels to blot and lift the remaining moisture.
  7. Finish your cleaning by going over the carpet with a carpet grooming brush. Rodriguez-Zaba recommends this rake-like grooming brush, which can be used on cut-pile carpets. (Don’t use this tool on loop-pile carpets.)

Keep these tips in mind:

  • Choose a day when you can open your windows, which will help speed the drying process.
  • Before your start cleaning, move furniture and anything else that rests on the carpet.
  • Start in a far corner of the room and work out toward the door or room threshold, so you don’t have to walk over just-cleaned areas.
  • Work in small sections.
  • Be sure to rinse thoroughly so you remove any residue.

 

 

 

 

 

 

Back to top button